ADM13305-25ARZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM13305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.86V |
| Overvoltage Threshold | 3.02V |
| Number of Monitored Inputs | 2 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM13305-25ARZ-RL7 Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. A series of 2 channels can be found on this supervisor. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. The mount is attached to Surface Mount. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 2.7V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 40μA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using ADM13305, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 40μA. On the power management, 2 inputs are monitored.
ADM13305-25ARZ-RL7 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
40μA operating supply current
ADM13305-25ARZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM13305-25ARZ-RL7 Voltage Supervisors applications.
- Detection of phase loss
- Radar
- Smartphones
- DVR
- Power distribution systems of infant care room
- External alarm
- Important electronics for automotive safety
- Computer applications
- Detection of phase imbalance
- Military communications
