ADM1810-10AKSZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.35V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Threshold Voltage | +4.35V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1810-10AKSZ-RL7 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 3. 3 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 16μA. It is always advisable to use ADM1810, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA. There are 1 inputs monitored at once on the power management.
ADM1810-10AKSZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1810-10AKSZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1810-10AKSZ-RL7 Voltage Supervisors applications.
- Telecommunications equipment
- Battery cars
- Dash board
- Fire equipment power monitoring system
- Unattended substation automation
- Insulation fault location system
- Precision measurement
- Battery-powered equipment
- Radio
- Low voltage/high power - AI, GPU
