ADM1815-10ARTZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.88V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.88V |
| Undervoltage Threshold | 2.8V |
| Overvoltage Threshold | 2.97V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1815-10ARTZ-RL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. It has a total of 3 pins that are attached to IC management. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 16μA. For similar manage ics search of the manufacturer, you can always refer to ADM1815, the base PMIC number. A maximum supply temperature of 16μA can be used with this power management. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM1815-10ARTZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1815-10ARTZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1815-10ARTZ-RL7 Voltage Supervisors applications.
- Smart meter
- Power distribution systems of operating room
- Automotive permanent magnet synchronous motors
- Utility meter
- Radar
- Analog circuit
- External alarm
- Important electronics for automotive protection
- Insulation fault location system
- Efficient information transmission
