ADM1815-R22ART-RL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.18V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.12V |
| Max Reset Threshold Voltage | 2.25V |
| Threshold Voltage | +2.18V |
| Undervoltage Threshold | 2.12V |
| Overvoltage Threshold | 2.25V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM1815-R22ART-RL7 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. This power management has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 16μA. For similar manage ics search of the manufacturer, you can always refer to ADM1815, the base PMIC number. A maximum supply temperature of 16μA can be used with this power management. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM1815-R22ART-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1815-R22ART-RL7 Applications
There are a lot of Analog Devices Inc. ADM1815-R22ART-RL7 Voltage Supervisors applications.
- Power distribution systems of ICU
- Detection of phase sequence
- Magnetic resonance imaging
- Military communications
- Network equipment
- Automotive power systems
- Electronics installed in the vehicle
- Set top box
- Digitally controlled LDO regulators circuit
- Leakage current detection
