ADM1816-5ARTZ-RL7
| Parameters | |
|---|---|
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.06V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.98V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.06V |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADM1816 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
ADM1816-5ARTZ-RL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 5V. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. There are a total of 3 pins on power management. 3 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~105°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 16μA volt supply current. You can always use ADM1816, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 16μA at the most. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM1816-5ARTZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1816-5ARTZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1816-5ARTZ-RL7 Voltage Supervisors applications.
- Smart meter
- DSP
- Fire equipment power monitoring system
- Power distribution systems of infant care room
- Detection of phase sequence
- DVR
- DC stabilized power supply module
- Solar power charger
- Functional modules
- Microcontroller system
