ADM1816-R23ART-RL
| Parameters | |
|---|---|
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1816 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.31V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.25V |
| Max Reset Threshold Voltage | 2.37V |
| Threshold Voltage | +2.31V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.37V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
ADM1816-R23ART-RL Overview
A total of 3 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 220 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. In total, it has 3 pins on IC management. This power management has 3 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~105°C TA degrees. Power management has an output of Open Drain or Open Collector during operation. In order to maintain a stable supply current for the power management, 16μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM1816, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 16μA. In total, there are 1 inputs on the power management that can be monitored.
ADM1816-R23ART-RL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1816-R23ART-RL Applications
There are a lot of Analog Devices Inc. ADM1816-R23ART-RL Voltage Supervisors applications.
- WiFi router
- Multi-voltage system
- Data storage applications
- Stable power system
- Computer applications
- DVR
- Power distribution systems of infant care room
- Smart meter
- Military electronics
- Fire equipment power monitoring system
