ADM1817-5ARTZ-RL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADM1817 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.06V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.98V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.06V |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1817-5ARTZ-RL7 Overview
It is mounted through 3 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 5V. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 3 pins on the board. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 16μA for the power management. It is always advisable to use ADM1817, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA. On the power management, 1 inputs are monitored.
ADM1817-5ARTZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1817-5ARTZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1817-5ARTZ-RL7 Voltage Supervisors applications.
- Functional modules
- DVR
- Embedded computing
- DSP
- Personal computers
- Power distribution systems of CCU
- Microcontroller system
- External alarm
- Power distribution systems of operating room
- Data storage applications
