ADM1817-R22ART-RL7
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1817 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.18V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.12V |
| Max Reset Threshold Voltage | 2.25V |
| Threshold Voltage | +2.18V |
| Undervoltage Threshold | 2.12V |
| Overvoltage Threshold | 2.25V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
ADM1817-R22ART-RL7 Overview
Power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 220 is specified for the package. The supervisor is always powered by a 5V volt supply. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 3 pins in it. Power managment ic pin count is 3. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 16μA. For similar manage ics search of the manufacturer, you can always refer to ADM1817, the base PMIC number. A maximum supply temperature of 16μA can be used with this power management. On the power management, there are a total of 1 inputs that are monitored.
ADM1817-R22ART-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1817-R22ART-RL7 Applications
There are a lot of Analog Devices Inc. ADM1817-R22ART-RL7 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Cloud computing
- Detection of phase loss
- Battery cars
- Network equipment
- Microprocessor system
- Insulation fault location system
- Refrigeration
- Leakage protection
- DSP
