ADM202EARUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM202 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 2.5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 230kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 650mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM202EARUZ-REEL7 Overview
With the enhanced 16-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tape & Reel (TR) package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number ADM202 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 16-pin driver IC with enhanced power dissipation control is featured here.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.Typically, the resolution of this receiver is specified to be 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are 1 transceivers implemented in this module isolated transceiver.On the part, 2 drivers are embedded in order to facilitate the operation of the device.Input voltage is set to a value of 6mA, and this integrating circuit is capable of driving LEDs with that voltage.
ADM202EARUZ-REEL7 Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
ADM202EARUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM202EARUZ-REEL7 Drivers/Receivers/Transceivers applications.
- transmission relay
- Cordless telephone
- Wireless access points
- Radio transmission
- Wireless network systems
- Bar, KTV wireless entertainment
- Datacom networking applications
- Transmission stations
- Servers
- Desktop radio
