ADM233LJNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | INTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | ADM233 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 3.5mA |
| Max Supply Current | 13mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 650mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Full Duplex |
| Height | 5.33mm |
| Length | 26.16mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM233LJNZ Overview
This LED driver IC features an enhanced 20-DIP (0.300, 7.62mm) package for driving common LEDs.Tube package is used for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.In this package, you will find 20 market-standard pinouts for this transceiver.For more variants of this part, try searching with the base part number ADM233, which indicates the product type, temperature, package, etc.The driver IC has improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.In the case of this receiver, a resolution of 2 bits is typically specified.There are two types of input voltage supply available for this IC, 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.This IC implements 1 transceivers overall.Embedded 2 drivers are included on the integrator circuit.With the INTERNAL CHARGE PUMP function, this optical transceiver module improves accuracy and stability of signal management overall.This integrating circuit is able to drive LEDs with an input voltage of 13mA.Input currents above 13mA could lead to mal-functions in this can transceiver.
ADM233LJNZ Features
Tube package
20 pin count
20 pins
5V power supply
ADM233LJNZ Applications
There are a lot of Analog Devices Inc. ADM233LJNZ Drivers/Receivers/Transceivers applications.
- Satellite communications networks
- Automation systems
- Wireless multimedia center in smart home
- LAN, SAN, WAN (local, storage, work area networks)
- Point-to-point networking
- Mainframes, workstations or storage devices
- Laser diode bonding
- Aircraft positioning
- Televisions
- Datacom networking applications
