ADM3101EACPZ-250R7
| Parameters | |
|---|---|
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | DUMMY VAL |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM3101 |
| Pin Count | 12 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-232 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 400mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 950μm |
| Length | 3.15mm |
| Width | 3.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
ADM3101EACPZ-250R7 Overview
LED drivers with the enhanced 12-WFQFN Exposed Pad, CSP package will be able to drive a variety of common LEDs with ease.There is a Tape & Reel (TR) package for this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver consumes 3V~5.5V for its power supplyAt any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.This part number ADM3101 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation control is provided by this 12-pin driver IC.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.An input voltage supply of 3.3V is required to operate the transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.This IC implements 1 transceivers overall.ICs with DUMMY VAL functions also improve the overall stability and accuracy of signal management.It is capable of driving LEDs with a voltage of 5mA as the input voltage to this integrating circuit.
ADM3101EACPZ-250R7 Features
Tape & Reel (TR) package
12 pin count
12 pins
ADM3101EACPZ-250R7 Applications
There are a lot of Analog Devices Inc. ADM3101EACPZ-250R7 Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Wireless projection application for conferences
- Carrier phase observations
- AV receiver
- Metro access rings
- Interconnection between switches and computers
- Home theater wiring-free
- Tuner
- Datacom networking applications
- Telecom applications
