ADM3311EARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3311 |
| Pin Count | 28 |
| Operating Supply Voltage | 2.7V |
| Interface | RS-232 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Duplex | Full |
| Receiver Hysteresis | 140mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Number of Receivers | 5 |
| Height | 1.05mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3311EARUZ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 28-TSSOP (0.173, 4.40mm Width) package.This receiver is mounted in the Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply requirements for this differential driver are 2.7V~3.6V.At any given time, there can be up to 3/5 eligible receivers/drivers for this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.An operating voltage range of 3.3V is suitable for this line driver ic.In this wide receiver, 28 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 28 market standard pinouts so that it can be easily used.The base part number ADM3311 identifies the product type, temperature, package, etc., so you can search for more variants by using it.Wide receiver with enhanced power dissipation control, 28-pin.There is a voltage input supply of 2.7V required for the operation of this integrated circuit.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There are 1 transceivers implemented in this module isolated transceiver.The box contains 5 receivers.The part is embedded with 3 drivers, so it can be used with 3 devices.Using the input voltage of 1μA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.Input currents above 35mA could lead to mal-functions in this can transceiver.
ADM3311EARUZ Features
Tube package
28 pin count
28 pins
ADM3311EARUZ Applications
There are a lot of Analog Devices Inc. ADM3311EARUZ Drivers/Receivers/Transceivers applications.
- Data center
- Wireless security systems
- Routers
- Wireless multimedia center in smart home
- Low power, low voltage systems
- Cordless telephone
- Fiber distributed data interface (FDDI)
- Remote controls
- Carrier phase observations
- AV receiver
