ADM3485ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3485 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 2V |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Output Current | 250mA |
| Propagation Delay | 35 ns |
| Data Rate | 10Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Output Low Current-Max | 0.0025A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADM3485ARZ-REEL7 Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, this wide receiver can be placed.It takes 3V~3.6V from the power supply to run this differential driver.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 3.3V can operate efficiently.This wide receiver has 8 terminations for driving and receiving data signals.This transceiver is packaged with 8 market standard pinoutsWith the part number ADM3485 identifying the product type, temperature, package, etc., you can search with it to see more variants.Wide receiver with enhanced power dissipation control, 8-pin.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 3.3V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.With this integrating circuit you can drive LEDs of a voltage of up to 2.2mA. It can be used to drive large displays.A voltage of 2V can be delivered by Wide receiver.A 250mA output current can be obtained from this bluetooth transceiver
ADM3485ARZ-REEL7 Features
Tape & Reel (TR) package
8 pin count
8 pins
ADM3485ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM3485ARZ-REEL7 Drivers/Receivers/Transceivers applications.
- Thermal management
- Optical sub-assembly (OSA)
- Vehicle
- Wired telephone
- Fiber optic cable connection network
- Wireless projection application for business talks
- Laser diode bonding
- Precision geodetic measurement
- Routers
- Single to Multimode Fiber Conversion
