ADM3490ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3490 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Max Supply Current | 2.2mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.0025A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3490ARZ Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.There is a Tube package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~3.6V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.As the base part number ADM3490 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.8-pin driver chip with enhanced power dissipation.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.There are 1 transceivers in total that this module isolated transceiver implements.An input voltage of 2.2mA is recommended for this integrating circuit to be able to drive LEDs.Input currents above 2.2mA could lead to mal-functions in this can transceiver.
ADM3490ARZ Features
Tube package
8 pin count
8 pins
ADM3490ARZ Applications
There are a lot of Analog Devices Inc. ADM3490ARZ Drivers/Receivers/Transceivers applications.
- Desktop PC
- Single fiber bidirectional application
- Single to Multimode Fiber Conversion
- Indoor ad hoc meeting
- WDM transmission
- Wireless HD Photography
- SONET/SDH Network
- Wireless network systems
- Wireless smart house
- Thermal management
