ADM4850ACPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM4850 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 160μA |
| Nominal Supply Current | 160μA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 20mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2500 ns |
| Output Low Current-Max | 0.004A |
| Height | 850μm |
| Length | 3.25mm |
| Width | 3.25mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM4850ACPZ-REEL7 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-WFDFN Exposed Pad, CSP package.There is a Tape & Reel (TR) package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, you can install this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.This wide receiver has 8 terminations for driving and receiving data signals.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number ADM4850 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control driver IC featuring 8 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.An input voltage supply of 5V is required to operate the transceiver module.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are 1 transceivers implemented in this module isolated transceiver.An input voltage of 160μA is recommended for this integrating circuit to be able to drive LEDs.
ADM4850ACPZ-REEL7 Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
ADM4850ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM4850ACPZ-REEL7 Drivers/Receivers/Transceivers applications.
- Wireless smart house
- SONET/SDH Network
- Bar, KTV wireless entertainment
- Switching system
- Wireless interactive experience
- Aircraft navigation
- Ship
- Wired telephone
- Switches
- Precision geodetic measurement
