ADM6315-26D4ART-RL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | TIN LEAD |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM6315 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 1.12s Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.68V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.58V |
| Overvoltage Threshold | 2.68V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 2.688 s |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
ADM6315-26D4ART-RL Overview
It is mounted through 4 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 220. When 5V is applied to the power ic, it conducts. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 4 pins that are attached to IC management. This power management has 4 pins. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 15μA. It is always advisable to use ADM6315, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 15μA. The power management monitors 1 inputs at once.
ADM6315-26D4ART-RL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM6315-26D4ART-RL Applications
There are a lot of Analog Devices Inc. ADM6315-26D4ART-RL Voltage Supervisors applications.
- Detection of phase loss
- Radar
- DSP
- Power communication system
- Detection of phase imbalance
- Efficient information transmission
- DC stabilized power supply module
- Telecommunications equipment
- Detection of phase sequence
- Kitchen appliances
