Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM6316 |
Output |
Push-Pull, Totem Pole |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
20μA |
Nominal Supply Current |
10μA |
Max Supply Current |
20μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
3V |
Reset Timeout |
20ms Minimum |
Min Reset Threshold Voltage |
2.955V |
Max Reset Threshold Voltage |
3.045V |
Undervoltage Threshold |
2.955V |
Overvoltage Threshold |
3.045V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
40 μs |
Length |
2.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
ADM6316BX30ARJZ-R7 Overview
This power management consists of 5 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3.3V supply voltage, the power management conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 20μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM6316, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 20μA. There are 1 inputs monitored at once on the power management.
ADM6316BX30ARJZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
ADM6316BX30ARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6316BX30ARJZ-R7 Voltage Supervisors applications.
- Telecommunications equipment
- Dash board
- Microcontroller system
- Multi-voltage system
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Insulation fault location system
- Medical-specific insulation monitor
- Kitchen appliances
- DVR