ADM6316DZ26ARJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM6316 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 1.12s Minimum |
| Min Reset Threshold Voltage | 2.591V |
| Max Reset Threshold Voltage | 2.669V |
| Undervoltage Threshold | 2.591V |
| Overvoltage Threshold | 2.669V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 2.24 s |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6316DZ26ARJZ-R7 Overview
As you can see, this power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 5 pins in it. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 20μA. A similar IC managements number of the manufacturer can always be found by using ADM6316, the base power ics number. Voltage supervisor can work with a supply temperature of 20μA at the most. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM6316DZ26ARJZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
ADM6316DZ26ARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6316DZ26ARJZ-R7 Voltage Supervisors applications.
- FPGA design
- Smartphones
- Consumer electronics
- Battery cars
- Medical-specific isolation transformer
- Battery-powered equipment
- Low voltage/high power - AI, GPU
- Microprocessor system
- Efficient information transmission
- Computer applications
