ADM6326-27ARTZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.7 V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | ADM6326 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.66V |
| Max Reset Threshold Voltage | 2.741V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.66V |
| Overvoltage Threshold | 2.741V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 185 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6326-27ARTZ-R7 Overview
A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3V is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 1μA. In addition, IC management are other features such as [0], to mention only a few. You can always use ADM6326, the base supervisor number, to search for similar PMICs of the manufacturer. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM6326-27ARTZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
ADM6326-27ARTZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6326-27ARTZ-R7 Voltage Supervisors applications.
- Precision measurement
- Magnetic resonance imaging
- Low voltage/high power - AI, GPU
- Cloud computing
- DC stabilized power supply module
- Insulation fault location system
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- Leakage protection
- Power distribution systems of CCU
