ADM6328-22ARTZ-R7
| Parameters | |
|---|---|
| Min Supply Voltage | 1V |
| Operating Supply Current | 500nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.2V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.167V |
| Max Reset Threshold Voltage | 2.233V |
| Threshold Voltage | +2.2V |
| Undervoltage Threshold | 2.167V |
| Overvoltage Threshold | 2.233V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 185 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.2 V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | ADM6328 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
ADM6328-22ARTZ-R7 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3V supply voltage, the power management conducts. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 500nA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using ADM6328, the base power ics number. On the power management, there are a total of 1 inputs that are monitored.
ADM6328-22ARTZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current
ADM6328-22ARTZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6328-22ARTZ-R7 Voltage Supervisors applications.
- Battery-powered equipment
- Power distribution systems of operating room
- Radio
- Electric heating appliances
- Automotive power systems
- Analog circuit
- Transformer load monitoring equipment
- Dash board
- Microcontroller system
- Fire equipment power monitoring system
