ADM6328-25ARTZ-R7
| Parameters | |
|---|---|
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.5 V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | ADM6328 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 500nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.462V |
| Max Reset Threshold Voltage | 2.537V |
| Threshold Voltage | +2.5V |
| Undervoltage Threshold | 2.462V |
| Overvoltage Threshold | 2.537V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 185 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
ADM6328-25ARTZ-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3V is used to conduct the PMIC chip. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 500nA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using ADM6328, the base power ics number. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM6328-25ARTZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current
ADM6328-25ARTZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6328-25ARTZ-R7 Voltage Supervisors applications.
- Electronics installed in the vehicle
- External alarm
- WiFi router
- Kitchen appliances
- Power distribution systems of infant care room
- Utility meter
- Telecommunications equipment
- Power distribution systems of operating room
- Multi-voltage system
- Power distribution systems of ICU
