ADM6328-28ARTZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.8 V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | ADM6328 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 500nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.8V |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.758V |
| Max Reset Threshold Voltage | 2.842V |
| Threshold Voltage | +2.8V |
| Undervoltage Threshold | 2.758V |
| Overvoltage Threshold | 2.842V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 185 ms |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6328-28ARTZ-R7 Overview
This power management consists of 3 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3V is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. There are 3 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 500nA is the recommended value. There are other features such as RESET THRESHOLD VOLTAGE IS 2.8 V to name a few. It is always advisable to use ADM6328, the base supervisor number, when searching for similar PMICs from the manufacturer. In total, there are 1 inputs on the power management that can be monitored.
ADM6328-28ARTZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current
ADM6328-28ARTZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6328-28ARTZ-R7 Voltage Supervisors applications.
- Kitchen appliances
- Unattended substation automation
- Stable power system
- Refrigeration
- Precision measurement
- Efficient information transmission
- Automotive permanent magnet synchronous motors
- DVR
- Power distribution systems of ICU
- Microprocessor system
