ADM6384YKS29D1Z-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM6384 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 13μA |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 1ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 2 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6384YKS29D1Z-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for SC-82A, SOT-343 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. A total of 4 pins are located on this power management. Power managment ic pin count is 4. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 13μA. You can always use ADM6384, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 13μA can be used with this power management. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM6384YKS29D1Z-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
ADM6384YKS29D1Z-R7 Applications
There are a lot of Analog Devices Inc. ADM6384YKS29D1Z-R7 Voltage Supervisors applications.
- DVR
- Precision measurement
- emergency room
- Detection of phase loss
- Power communication system
- External alarm
- Network equipment
- Medical-specific isolation transformer
- Fire equipment power monitoring system
- Solar power charger
