ADM6384YKS39D2Z-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM6384 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 13μA |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.9V |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 3.8V |
| Max Reset Threshold Voltage | 4V |
| Undervoltage Threshold | 3.8V |
| Overvoltage Threshold | 4V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 40 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6384YKS39D2Z-R7 Overview
This power management consists of 4 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of SC-82A, SOT-343 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. 4 pins are present in total in this power management. 4 pins make up the power management. IC management can only work with a supply voltage of 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C TA . Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 13μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM6384, which is the base power ics number. The power management can work with a maximum supply temperature of 13μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM6384YKS39D2Z-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
ADM6384YKS39D2Z-R7 Applications
There are a lot of Analog Devices Inc. ADM6384YKS39D2Z-R7 Voltage Supervisors applications.
- FPGA design
- Sensitive sensors
- Multi-voltage system
- Urban rail transit weak current power monitoring
- Important electronics for automotive protection
- Power distribution systems of operating room
- Magnetic resonance imaging
- Smartphones
- Analog circuit
- Satellite navigation
