ADM6384YKS46D2Z-R7
| Parameters | |
|---|---|
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM6384 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 13μA |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 4.51V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 4.51V |
| Overvoltage Threshold | 4.74V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 40 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
ADM6384YKS46D2Z-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1.8V is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In total, the power management has 4 pins in it. There are 4 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 13μA volt supply current. A similar IC managements number of the manufacturer can always be found by using ADM6384, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 13μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM6384YKS46D2Z-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
ADM6384YKS46D2Z-R7 Applications
There are a lot of Analog Devices Inc. ADM6384YKS46D2Z-R7 Voltage Supervisors applications.
- WiFi router
- Digitally controlled LDO regulators circuit
- Solar power charger
- Electrical fire monitoring system
- External alarm
- Radar
- Transformer load monitoring equipment
- Power distribution systems of ICU
- Electric heating appliances
- Sensitive sensors
