ADM660ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Output Type | Fixed |
| Max Output Current | 100A |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 5μA |
| Nominal Supply Current | 4.5mA |
| Output Configuration | Positive or Negative |
| Current - Output | 100mA |
| Max Output Voltage | 14V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz 120kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 5V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM660ANZ Overview
A Tube package is used in this voltage regulator to optimize performance. There are 8 terminations in this harley voltage regulator. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR CONVERTER type. The space-saving 8-DIP (0.300, 7.62mm) package is available for this voltage regulator. 1 outputs have been configured in the voltage regulator 12v. This DC DC switching regulator generates Fixed output on its output pins. This voltage regulator 12v fits the Through Hole mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator of this type operates at a switching frequency of 25kHz 120kHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin. DC DC switching regulator's maximum design flexibility comes from its output current of 100mA. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. Listed under the subcategory of Other Analog ICs is this voltage regulator 12v. ADM660 is a family of voltage regulators that belong to the DC/DC industry. There is a possibility that DC DC switching regulator can give voltage at 14V volts. The switching regulator operation of the system is controlled by 8 pins. There should be at least a 5V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 100A A is available to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 14V. A dc to dc voltage regulator's dc to dc voltage regulator's minimum supply voltage of 1.5V V ensures reliable performance. A maximum supply voltage of 7V is required for adjusting voltage regulator to operate. The voltage regulator operates with a supply current of 5μAmps.
ADM660ANZ Features
1 outputs
8 pins
ADM660ANZ Applications
There are a lot of Analog Devices Inc. ADM660ANZ Voltage Regulators applications.
- Nuclear power plants
- Drilling machines
- Linear guide
- Low output voltage switching power supply circuits
- Computer-related products
- Grinders
- Special machining machine tools
- Gear/thread machining machines
- Telecommunications equipment
- Arc suppression circuits
