ADM6711RAKSZ-REEL7
| Parameters | |
|---|---|
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 640 ms |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM6711 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
ADM6711RAKSZ-REEL7 Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-82A, SOT-343 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3V. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 4 pins on IC management. This power management system has 4 pins. IC management can only work with a supply voltage of 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 35μA. It is always advisable to use ADM6711, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3V power to power this power management. The maximum supply temperature is 60μA. The power management has 1 monitored inputs.
ADM6711RAKSZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
35μA operating supply current
ADM6711RAKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM6711RAKSZ-REEL7 Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Set top box
- emergency room
- Battery-powered equipment
- Radar
- Solar power charger
- Low voltage/high power - AI, GPU
- Power distribution systems of ICU
- DVR
- Power distribution systems of CCU
