ADM6823TYRJZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.08 V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM6823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6823TYRJZ-RL7 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. In a 1V supply voltage, the power management conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 5 pins. 5 pins make up the power management. IC management can only work with a supply voltage of 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 20μA for the power management. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM6823, which is the base power ics number. Voltage supervisor can work with a supply temperature of 20μA at the most. The power management monitors 1 inputs at once.
ADM6823TYRJZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
ADM6823TYRJZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM6823TYRJZ-RL7 Voltage Supervisors applications.
- emergency room
- DC stabilized power supply module
- Power distribution systems of infant care room
- Low voltage/high power - AI, GPU
- Electric heating appliances
- Data storage applications
- Consumer electronics
- Fire equipment power monitoring system
- Detection of phase sequence
- Detection of phase imbalance
