ADM6823ZYRJZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Base Part Number | ADM6823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.25V |
| Max Reset Threshold Voltage | 2.38V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.38V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM6823ZYRJZ-RL7 Overview
A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1V is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 20μA. For similar manage ics search of the manufacturer, you can always refer to ADM6823, the base PMIC number. A maximum supply temperature of 20μA can be used. There are 1 inputs monitored at once on the power management.
ADM6823ZYRJZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
ADM6823ZYRJZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM6823ZYRJZ-RL7 Voltage Supervisors applications.
- Stable power system
- Medical-specific isolation transformer
- Analog circuit
- Functional modules
- Low voltage/high power - AI, GPU
- DVR
- Unattended substation automation
- Magnetic resonance imaging
- Digitally controlled LDO regulators circuit
- Network equipment
