ADM690AARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 940μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM690AARMZ Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Tube-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are a total of 3 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. This IC power shares lots of benefits with other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 5V volt supply. By Surface Mount, IC management has been mounted. In total, the power management has 8 pins in it. Pin count of the power management is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 100μA for the power management. For similar manage ics search of the manufacturer, you can always refer to ADM690, the base PMIC number. The maximum supply temperature voltage supervisor can handle is 100μA. The power management has 1 monitored inputs.
ADM690AARMZ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM690AARMZ Applications
There are a lot of Analog Devices Inc. ADM690AARMZ Voltage Supervisors applications.
- Power distribution systems of operating room
- Consumer electronics
- Detection of phase sequence
- Transformer load monitoring equipment
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
- DSP
- Automotive power systems
- Unattended substation automation
- Battery-powered equipment
