ADM690AARNZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM690AARNZ-REEL Overview
Power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. A series of 2 channels can be found on this supervisor. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 100μA. For similar manage ics search of the manufacturer, you can always refer to ADM690, the base PMIC number. To be able to work, this power management requires 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 100μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM690AARNZ-REEL Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM690AARNZ-REEL Applications
There are a lot of Analog Devices Inc. ADM690AARNZ-REEL Voltage Supervisors applications.
- Power distribution systems of infant care room
- Fire equipment power monitoring system
- Analog circuit
- Battery-powered equipment
- Data storage applications
- Digitally controlled LDO regulators circuit
- Household appliances
- Multi-voltage system
- Radio
- Set top box
