ADM690ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 400mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 4.95mm |
| Length | 10.92mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM690ANZ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tube package is used to package the power management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. Pin count of the power management is 8. It is recommended that Vsup should not be less than 4.75V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 100μA. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to ADM690, the base PMIC number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature is 1.95mA. The power management has 1 monitored inputs.
ADM690ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
100μA operating supply current
ADM690ANZ Applications
There are a lot of Analog Devices Inc. ADM690ANZ Voltage Supervisors applications.
- Electric heating appliances
- Household appliances
- Efficient information transmission
- Embedded computing
- WiFi router
- Electrical fire monitoring system
- Smart meter
- Telecommunications equipment
- Power distribution systems of ICU
- Medical-specific isolation transformer
