ADM691AARNZ
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM691 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 700mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
ADM691AARNZ Overview
There are 16 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 16-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC management and other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 4.75V supply voltage, the power management conducts. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. 16 pins are present in total in this power management. This power management has 16 pins. Supply voltage (Vsup) should be at least 0V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. The supply current of the power management is 100μA. To find similar IC managements from the manufacturer, you can always search by ADM691. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA. The power management has 1 monitored inputs.
ADM691AARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
ADM691AARNZ Applications
There are a lot of Analog Devices Inc. ADM691AARNZ Voltage Supervisors applications.
- Battery cars
- Urban rail transit weak current power monitoring
- Leakage protection
- Kitchen appliances
- Power distribution systems of CCU
- Radar
- Electronics installed in the vehicle
- Linux and server computing
- Detection of phase imbalance
- emergency room
