ADM691ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM691 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 4.95mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM691ANZ Overview
A total of 16 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 16-DIP (0.300, 7.62mm) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. When 5V is applied to the power ic, it conducts. The power management is mounted by Through Hole. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 16 pins in it. This power management has 16 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 4.75V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 100μA is the recommended value. The other features include, for example, [0], which is just one example. You can always use ADM691, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 1.95mA. There are 1 inputs monitored at once on the power management.
ADM691ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
100μA operating supply current
ADM691ANZ Applications
There are a lot of Analog Devices Inc. ADM691ANZ Voltage Supervisors applications.
- Detection of phase sequence
- Electric heating appliances
- Utility meter
- Military electronics
- Low voltage/high power - AI, GPU
- Transformer load monitoring equipment
- Satellite navigation
- Microprocessor system
- Electrical fire monitoring system
- Power distribution systems of ICU
