ADM691AR-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM691 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 2.65mm |
| Width | 7.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM691AR-REEL Overview
It is mounted through 16 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. Please find attached 16-SOIC (0.295, 7.50mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 240 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 16 pins on the board. 16 pins are on the supervisor. It is recommended that Vsup should not be less than 4.75V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 100μA. There are other features such as RESET CONTROL to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM691, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor. The maximum supply temperature voltage supervisor can handle is 1.95mA. The power management has 1 monitored inputs.
ADM691AR-REEL Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
100μA operating supply current
ADM691AR-REEL Applications
There are a lot of Analog Devices Inc. ADM691AR-REEL Voltage Supervisors applications.
- Military electronics
- Efficient information transmission
- Battery cars
- Leakage current detection
- Computer applications
- Linux and server computing
- Stable power system
- Power communication system
- Electric heating appliances
- Network equipment
