ADM691SQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM691 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM691SQ Overview
It is mounted through 16 terminals on the power management. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 16-CDIP (0.300, 7.62mm) package. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. The supervisor is always powered by a 5V volt supply. The power management is mounted by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 16 pins on IC management. There are 16 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Through Hole mounting type. Temperature setting for the supervisors should be -55°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. The supervisor's supply current is specified to 1.95mA. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM691, which is the base power ics number. This power management requires 5V power to work. The maximum supply temperature is 1.95mA. There are 1 inputs monitored at once on the power management.
ADM691SQ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
1.95mA operating supply current
ADM691SQ Applications
There are a lot of Analog Devices Inc. ADM691SQ Voltage Supervisors applications.
- Smart meter
- DC stabilized power supply module
- Network equipment
- Military electronics
- Microprocessor system
- Medical-specific isolation transformer
- Military communications
- Battery-powered equipment
- Sensitive sensors
- Household appliances
