ADM692AANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 400mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM692AANZ Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. This power management is made up of 3 channels which are available in a series format. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. IC management conducts in a 5V-voltage supply. The mount is provided by Through Hole. 8 pins are present in total in this power management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 100μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM692, which is the base power ics number. The maximum supply temperature is 100μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM692AANZ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM692AANZ Applications
There are a lot of Analog Devices Inc. ADM692AANZ Voltage Supervisors applications.
- Important electronics for automotive protection
- WiFi router
- DSP
- Telecommunications equipment
- Solar power charger
- Satellite navigation
- Cloud computing
- Battery-powered equipment
- Efficient information transmission
- Electronics installed in the vehicle
