ADM692AARNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM692AARNZ Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 3 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 5V volt supply. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 100μA. To find similar IC managements from the manufacturer, you can always search by ADM692. There is a requirement for 5V power to power this power management. The power management can work with a maximum supply temperature of 100μA. The power management monitors 1 inputs at once.
ADM692AARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM692AARNZ Applications
There are a lot of Analog Devices Inc. ADM692AARNZ Voltage Supervisors applications.
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Power distribution systems of ICU
- Analog circuit
- Detection of phase imbalance
- Kitchen appliances
- Refrigeration
- Microprocessor system
- Important electronics for automotive protection
- Sensitive sensors
