ADM692ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 400mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.48V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.48V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 4.95mm |
| Length | 10.92mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM692ANZ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management conducts in a 5V-voltage supply. Through Hole mounts IC management. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. Pin count of the power management is 8. IC management can only work with a supply voltage of 4.5V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 100μA. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM692, which is the base power ics number. The power management must be powered by 5V volts to function properly. The maximum supply temperature is 1.95mA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM692ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
100μA operating supply current
ADM692ANZ Applications
There are a lot of Analog Devices Inc. ADM692ANZ Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Embedded computing
- Display equipment
- WiFi router
- emergency room
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- Precision measurement
- Military electronics
