ADM692SQ
| Parameters | |
|---|---|
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.48V |
| Undervoltage Threshold | 1.3V |
| Overvoltage Threshold | 5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM692 |
| Output | Push-Pull, Totem Pole |
ADM692SQ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tube. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 8-CDIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Specifies a reflow peak temperature of NOT APPLICABLE for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. The mount is provided by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. This power management has 8 pins. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -55°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 1.95mA is the recommended value. There are other features such as RESET CONTROL to name a few. You can always use ADM692, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 5V power to work. At the most, voltage supervisor can work with a supply temperature of 1.95mA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM692SQ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
1.95mA operating supply current
ADM692SQ Applications
There are a lot of Analog Devices Inc. ADM692SQ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Consumer electronics
- Dash board
- Battery cars
- Automotive power systems
- Precision measurement
- Military electronics
- External alarm
- Analog circuit
- Personal computers
