ADM693AANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM693 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 842mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 5.33mm |
| Length | 21.33mm |
| Width | 7.11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM693AANZ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT APPLICABLE. Manage ics operate at 4.5V supply voltages. The mount is attached to Through Hole. There are a total of 16 pins on power management. Pin count of the power management is 16. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 100μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM693, the base power ics number. The power management can work with a maximum supply temperature of 100μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM693AANZ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
ADM693AANZ Applications
There are a lot of Analog Devices Inc. ADM693AANZ Voltage Supervisors applications.
- Power distribution systems of ICU
- Power distribution systems of infant care room
- Embedded computing
- Dash board
- Efficient information transmission
- Satellite navigation
- Linux and server computing
- Important electronics for automotive protection
- Medical-specific insulation monitor
- Analog circuit
