banner_page

ADM693ANZ

5V16 Terminals 16-Pin ADM693 Voltage supervisor1 Channels Min 4.5V Max 5.5V


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADM693ANZ
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 873
  • Description: 5V16 Terminals 16-Pin ADM693 Voltage supervisor1 Channels Min 4.5V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Additional Feature RESET CONTROL
Subcategory Power Management Circuits
Max Power Dissipation 600mW
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number ADM693
Output Open Drain, Push-Pull
Pin Count 16
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 100μA
Nominal Supply Current 1.95mA
Power Dissipation 600mW
Max Supply Current 1.95mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.4V
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.25V
Max Reset Threshold Voltage 4.48V
Undervoltage Threshold 4.25V
Overvoltage Threshold 4.48V
Number of Monitored Inputs 1
Reset Delay Time 70 ms
Height 4.95mm
Length 21.33mm
Width 7.11mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADM693ANZ Overview


This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. It is packaged with Tube. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. In a 5V supply voltage, the power management conducts. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 16 pins. Pin count of the power management is 16. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. There is a 100μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use ADM693, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 1.95mA. In total, there are 1 inputs on the power management that can be monitored.

ADM693ANZ Features


Battery Backup Circuit type
Minimum supply voltage of 4.5V
100μA operating supply current

ADM693ANZ Applications


There are a lot of Analog Devices Inc. ADM693ANZ Voltage Supervisors applications.

  • Automotive power systems
  • Insulation fault location system
  • Display equipment
  • DC stabilized power supply module
  • Leakage protection
  • Microprocessor system
  • Embedded computing
  • Electrical fire monitoring system
  • Smartphones
  • Military electronics

Write a review

Note: HTML is not translated!
    Bad           Good