ADM693ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM693 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.48V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.48V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 2.35mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM693ARZ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. This power ic is packaged in a way that looks like a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. In a 5V supply voltage, the power management conducts. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 16 pins on power management. Power managment ic pin count is 16. It is recommended that Vsup should not be less than 4.5V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. Supplied with a operating current of 100μA, this PMIC is capable of fully function as specified. The other features include, for example, [0], which is just one example. For similar manage ics search of the manufacturer, you can always refer to ADM693, the base PMIC number. To operate this power management, you will need at least 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.95mA. The power management has 1 monitored inputs.
ADM693ARZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
100μA operating supply current
ADM693ARZ Applications
There are a lot of Analog Devices Inc. ADM693ARZ Voltage Supervisors applications.
- Military electronics
- Detection of phase imbalance
- Power communication system
- Unattended substation automation
- Sensitive sensors
- Set top box
- Network equipment
- Low voltage/high power - AI, GPU
- Multi-voltage system
- Utility meter
