ADM694ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM694 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 400mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 4.95mm |
| Length | 10.92mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM694ANZ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. IC management conducts at a voltage of 5V. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 1.95mA. The other features include, for example, [0], which is just one example. For similar manage ics search of the manufacturer, you can always refer to ADM694, the base PMIC number. The power management must be powered by 5V volts to function properly. Voltage supervisor can work with a supply temperature of 1.95mA at the most. In total, there are 1 inputs on the power management that can be monitored.
ADM694ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
1.95mA operating supply current
ADM694ANZ Applications
There are a lot of Analog Devices Inc. ADM694ANZ Voltage Supervisors applications.
- Power distribution systems of ICU
- emergency room
- Data storage applications
- Medical-specific isolation transformer
- Fire equipment power monitoring system
- Detection of phase imbalance
- Magnetic resonance imaging
- Utility meter
- Detection of phase sequence
- Medical-specific insulation monitor
