ADM695ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET CONTROL |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM695 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM695ARZ-REEL Overview
As you can see, this power management is mounted through 16 terminals. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 16. 16 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.75V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 1.95mA. There are other features such as RESET CONTROL to name a few. It is always advisable to use ADM695, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 5V watts is required for the operation of this power management. At the most, voltage supervisor can work with a supply temperature of 1.95mA. There are a total of 1 monitored inputs on the power management.
ADM695ARZ-REEL Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
1.95mA operating supply current
ADM695ARZ-REEL Applications
There are a lot of Analog Devices Inc. ADM695ARZ-REEL Voltage Supervisors applications.
- External alarm
- Household appliances
- Electrical fire monitoring system
- Cloud computing
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Automotive power systems
- Magnetic resonance imaging
- Urban rail transit weak current power monitoring
- Consumer electronics
