ADM696SQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM696 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 600mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.3V |
| Reset Timeout | 35ms Minimum |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM696SQ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaged in the form of a Tube, power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 16-CDIP (0.300, 7.62mm) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of NOT APPLICABLE is specified for the package. In a 5V supply voltage, the power management conducts. Through Hole is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 16 pins. The pins of the power management system count 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole mounting is recommended. This power management is the recommended temperature range for the supervisors: -55°C~125°C TA. Power management has an output of Push-Pull, Push-Pull during operation. For this power management, there is an 1.95mA volt supply current. You can always use ADM696, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3.3/5V volts to function properly. The maximum supply temperature that PMIC chip can work with is 1.95mA. The power management monitors 1 inputs at once.
ADM696SQ Features
Battery Backup Circuit type
Minimum supply voltage of 3V
1.95mA operating supply current
ADM696SQ Applications
There are a lot of Analog Devices Inc. ADM696SQ Voltage Supervisors applications.
- Telecommunications equipment
- Automotive permanent magnet synchronous motors
- Kitchen appliances
- Magnetic resonance imaging
- Linux and server computing
- Leakage protection
- Embedded computing
- Insulation fault location system
- Important electronics for automotive safety
- Power distribution systems of operating room
