ADM6996FAAT1

2.8V~3.465V CMOS 10/100 Base-T/TX PHY Parallel Controllers Interface ICs QUAD ADM6996 128 Pins Switch 0.5mm 128-BFQFP

Manufacturer: Infineon Technologies
Nocochips NO: 376-ADM6996FAAT1
Package: 128-BFQFP
Datasheet: -
Stock: 284
Description: 2.8V~3.465V CMOS 10/100 Base-T/TX PHY Parallel Controllers Interface ICs QUAD ADM6996 128 Pins Switch 0.5mm 128-BFQFP(Kg)

Details

Tags

Parameters
Package / Case	128-BFQFP
Surface Mount	YES
Number of Pins	128
Operating Temperature	0°C~115°C
Packaging	Tray
Published	2017
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	128
Additional Feature	ALSO REQUIRES 3.3V SUPPLY
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	2.8V~3.465V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	220
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADM6996
Function	Switch
Qualification Status	Not Qualified
Interface	Parallel
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, LAN
Clock Frequency	25MHz
Protocol	Ethernet
Boundary Scan	NO
Low Power Mode	NO
Number of Serial I/Os	7
Standards	10/100 Base-T/TX PHY
Data Transfer Rate-Max	12.5 MBps
Data Encoding/Decoding Method	NRZ; NRZI; BIPH-LEVEL(MANCHESTER)
Height Seated (Max)	3.4mm
Length	20mm
Width	14mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM6996FAAT1 Overview

The package 128-BFQFP contains it. This product is easy to carry due to its Tray-shaped packaging. A reliable operation requires a temperature that is regulated to 0°C~115°C. If you use a 2.8V~3.465VV power supply, you should have no problem. The terminations in it can be broken down into 128's. When the supply voltage is 1.8V, high efficiency can be achieved. As a member of the ADM6996 family of numbers, it is a prime number. Using 128 pins allows the device to operate. It has SERIAL IO/COMMUNICATION CONTROLLER, LAN integrated circuits / uCs / peripherals. There is a 25MHz frequency involved in the clock of the device. There are 7 serial I/Os on the part. It is also possible to generate the number ALSO REQUIRES 3.3V SUPPLY using this device.