ADM699ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM699 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1.95mA |
| Nominal Supply Current | 1.95mA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.95mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 4.95mm |
| Length | 10.92mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM699ANZ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. When a supply voltage of 5V is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. There are a total of 8 pins on power management. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 3V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Through Hole is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 1.95mA is the recommended value. To find similar IC managements from the manufacturer, you can always search by ADM699. A maximum supply temperature of 1.95mA can be used. On the power management, there are a total of 1 inputs that are monitored.
ADM699ANZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
1.95mA operating supply current
ADM699ANZ Applications
There are a lot of Analog Devices Inc. ADM699ANZ Voltage Supervisors applications.
- Military communications
- Power distribution systems of infant care room
- Microcontroller system
- DSP
- Stable power system
- Consumer electronics
- Military electronics
- Important electronics for automotive protection
- Sensitive sensors
- Telecommunications equipment
