ADM706AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 727mW |
| Max Supply Current | 250μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM706AN Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tube, power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Manage ics operate at 5V supply voltages. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 250μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM706, which is the base power ics number. To operate this power management, you will need at least 5V volts of power. A maximum supply temperature of 250μA can be used. On the power management, there are a total of 1 inputs that are monitored.
ADM706AN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706AN Applications
There are a lot of Analog Devices Inc. ADM706AN Voltage Supervisors applications.
- Sensitive sensors
- Utility meter
- Power distribution systems of ICU
- Solar power charger
- Digitally controlled LDO regulators circuit
- Telecommunications equipment
- Battery-powered equipment
- Detection of phase sequence
- Battery cars
- External alarm
