ADM706PARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 350μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM706PARZ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3V is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. 8 pins are present in total in this power management. 8 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 250μA. You can always use ADM706, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 350μA. On the power management, 1 inputs are monitored.
ADM706PARZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706PARZ Applications
There are a lot of Analog Devices Inc. ADM706PARZ Voltage Supervisors applications.
- Power distribution systems of operating room
- Unattended substation automation
- Smart meter
- WiFi router
- Consumer electronics
- Important electronics for automotive safety
- Medical-specific insulation monitor
- Efficient information transmission
- emergency room
- Dash board
